G Keni Bike Tail Light Rechargeable, Anti-Theft Alarm, Warning Electric Horn, Bike Finder/Tracker with Remote, IPX6 Waterproof Electric Mountain Bike Accessories
$29.99 - $24.99
(as of Jun 14,2021 11:26:05 UTC – Details)
G Keni Bike Alarm Tail Light Rechargeable, It’s Not Just a Bike Tail Lights!
Notice!!! Please full in charging before the first usage, otherwise the remote will not work well!!!
Attention please: (1) the saddle bracket gap spacing between 1.97in-2.36in (50-60mm)
(2) if you do not like a loud alarm, pls choose another alarm light, our bike alarm is very loud to offering a security warning.
Name: Intelligent Remote Alarm Bike Taillights
Brand: G Keni
Battery Capacity: 800 mAh, Lithium battery
Remote Control Battery: 12V/27A, Alkaline battery
Weight: 0.194 pounds
Lamp beads: COB bright light source
Good for: Bike/mountain bike/road vehicles
Remote Size: 2.2×1.9×0.6inch
Taillight Size: 3.5×1.7×1 inch
Compatible bicycles: Mountain bike / Child bicycle /Road bike / Bicycle commuting / Ladies bike / Ordinary bicycle / Electric bike
Bike Alarm Light With Remote
Features of Bike Alarm Light
1. Safety Bike light with three distinct Light modes. (Fast Flash/Slow Flash/Steady On)
2. Theft-deterrent alarm with remote activation and deactivation.
3. Bike finder through light or sound up to 164 feet.
4. Electric horn.
5. USB rechargeable.
6. IPX5 Waterproof Design.
Two Way to Install The Bike Tail Light (1st)
1. Mount the light under the saddle.
1. Open the box packaging
2. Remove the bracket by fixed
3. The bracket is fixed to a bicycle saddle beam
4. With installation tool securing long screw
5. Taillight insert mounting bracket
6. With installation tool securing short screw
Attention please: the saddle bracket gap spacing between 1.97in-2.36in (50-60mm)
Two Way to Install The Bike Tail Light (2nd)
2. Mount the light to the seat post.
(Same as the 1st one)
How to Mount Remote Control
1.With remote control wearing tie through the bracket
2. The bracket on the bicycle on the cross, fixing tie.
3. Remote control can be inserted into the bracket
Tips: Please install the light according to the instruction book.
Bike Tracker Anti Theft
Extra-large alarm sound
Designed with 120 decibel alarm speaker for better outdoor penetration, A loud alarm can scare off the thieves effectively.
if you do not need a loud alarm bike light , pls choose our other Bike tail light as below!
IPX5 waterproof level
No matter how heavy the rain, the taillight keep the same high performance.
Long-Distance Search Function
Alarm will sound when you press the ringtone key, to find your Bike easily
(Longest Remote distance: 80-100meters)
USB charging for a variety of charging methods, such as power bank, usb adapter, car charger etc.
What’s in the box？
1x Host + Taillight bracket
1x Remote Control
2x Mounting bracket
1x Plastic Strap
1x Square gasket
1x USB Charging Cable
2 x Installation tool (large+small)
2x Screws (long + short)
1x Instruction Book
Frequent questions for this Bike Alarm Light!
(Q1): Why the remote controller can not connect the bike taillights?
(A1): Mostly it is causing by the taillight out of power, first to check the battery whether was fully charged? If no problem, then check the remote controller battery whether has power? If both are with power, just paring the taillights with the remote controller accordingly.
Please full in charging before the first usage, otherwise the remote will not work well!!!
(Q2): Why is the taillights alarm not sensitive?
(A2): Do not move the bike immediately after setting the alarm function, when you press LOCK button, need to wait for 3 seconds to hear one “BI’ sound, then you need to wait 3 seconds more it will enter into the alarm mode, In other words, after press LOCK button, the alarming function will work after 6-7 seconds. this design just avoids the wrong alarm when you lock your bike or take anything from your bike.
(Q3): If lost the remote controller, How can I get a new one?
(A3): it’s no problem, you can purchase a new remote controller from our shop.
(Q4): How to connect the new remote with the bike alarm light.
(A4): First, you need to press the BLUE button of backside for 7 seconds, after hearing one long sound “di…”, then the lost remote controller is not able to control the taillight at all.
2nd, long press to the BLUE button of the new remote for 2-3 seconds, when you hear one “di..” sound from the main unit, just press any button from the new remote controller, you will hear 2 times of “di di”, then it is paring automatically.
(Q5): When need to charge? How to know whether battery power is enough?
(A5): Press the remote controller, if you hear“du..du.” sound for 2 times, it means power is not enough.
If the remote distance becomes short, the light becomes weaker, and the sensitivity is not so good, all of these signals are telling you that taillight is going to be out of power. During the charging time, the weak light will be continuously on and turn off after fully charged for 2-3 hours.
SAFETY TAILLIGHTS: 3-distinct flashing modes: burst/slow/steady on, keep you and your bike in safety. Support for wireless remote control or manually switch. Water resistant.
ANTI-THEFT ALARM: Theft-deterrent alarm with remote activation and deactivation, up to be 120 decibels enough to frighten and deter thieves.
BIKE FINDER: distance in the open, the remote control operating distance up to 50m(164 feet), easily find your bike location through light or sound. Wireless electric horn to alert others or cars while riding thru traffic.
EASY MOUNTING WAY: Both saddle and seat post mounting kits are included. Attention please: the saddle mount bracket gap spacing between 1.97 in-2.36 in (50-60mm)
LONG TIME POWER STANDBY: USB rechargeable with built-in 700mAh lithium battery that lasts up to 15 days average use (or up to 15 hours of flashing), it takes 2-3 hours to be fully charged. We offer one year quality guarantee. we will do replacement for the problem items.